40kW 60kW 80kW Smart Twin Gun Wall-mount DC Fast EV Station for Park and Ride CCS2 NACS 10.1in Touch LCD OCPP 2.0
Flexible Dual-Output Power
Built for high-demand commercial charging, this dual-gun wall-mounted DC charger delivers dependable energy to two vehicles from a compact cabinet. The 40kW, 60kW, and 80kW platform accepts three-phase 400Vac plus or minus 15 percent input and provides regulated 200-1000Vdc output. Intelligent power sharing continuously balances available capacity according to vehicle demand, helping operators shorten queues and use the connection efficiently. A bright 10.1-inch Linux touch screen presents session status, voltage, current, and delivered energy at a glance. RFID, POS, and APP authorization options make everyday operation convenient, while the IP55 enclosure supports suitable indoor or outdoor installations.
Broad Vehicle Compatibility
Designed for mixed commercial fleets, the charger supports CCS1, CCS2, GBT, CHAdeMO, and NACS connector configurations so operators can match local vehicle requirements. High-efficiency power modules above 95 percent and a power factor above 0.98 help control energy losses and operating costs. When both outlets are active, the controller allocates output intelligently and responds smoothly as either vehicle changes its charging request. The wall-mounted 630 x 247 x 1660 mm cabinet preserves valuable parking and service space compared with many floor-standing alternatives. OCPP-ready communication, clear controls, and front-facing access simplify monitoring, maintenance, and routine fleet management.
Reliable Site Operation
From public facilities to fleet depots, this DC fast charger provides a consistent user experience across 40kW, 60kW, and 80kW ratings. Drivers can begin sessions with RFID cards, POS payment, or a connected APP, then follow progress on the responsive 10.1-inch display. The 200-1000Vdc range accommodates modern passenger cars, vans, and commercial vehicles, while dual outputs improve utilization during busy periods. IP55 protection helps shield internal electronics from dust and water exposure in properly planned locations, and integrated safety functions support controlled operation. Select the preferred power level, connector combination, and network option for a scalable charging installation that can grow with site demand.
| Model | MIDA-WM-40KW-60KW-80KW |
| Rated Power | 40kW / 60kW / 80kW |
| Input Voltage | 400Vac ±15% (3P+N+PE) |
| Input Frequency | 50/60Hz |
| Input Phases | Three-phase |
| Output Voltage | 200-1000Vdc |
| Max Output Current | 100A / 133A / 200A |
| Number of Guns | 2 |
| Charging Mode | CC / constant-current and constant-voltage |
| Efficiency | >95% |
| Power Factor | >0.98 |
| Protection Rating | IP55 |
| Screen | 10.1-inch Linux touch screen |
| Communication Protocol | OCPP 1.6J / 2.0 |
| Network | 4G / WiFi / Ethernet |
| Authorization | RFID / POS / APP |
| Connector Options | CCS1 / CCS2 / GBT / CHAdeMO / NACS |
| Power Sharing | Dynamic dual-gun allocation |
| Cabinet Dimensions | 630 x 247 x 1660 mm |
| Cooling | Intelligent forced-air cooling |
| Operating Temperature | -25°C to 55°C |
| Relative Humidity | 5% to 95%, non-condensing |
| Installation | Wall-mounted indoor or outdoor suitable site |
Products categories
-
Smart Advertising EV Charger 120kw 180kw DC Fas...
-
40kW 60kW Dual Connector Mobile EV Fast Charger...
-
Smart 60kW 80kW Dual Gun Wall-mount DC Fast Cha...
-
40kW Dual Gun Mobile DC Fast Charger for Public...
-
Advanced 120kw Ccs1 Commercial Evse Station Rfi...
-
30kW Wall-Mounted DC Fast Charger with RFID and...