7-22kW Residential AC Wallbox EV Charger for New Builds

Short Description:

Draft 7-22kW AC wallbox EV charger for new build residential charging, with documented 230V or 380V AC output, RFID, Plug&Charge, App, WiFi, Ethernet, optional 4G, OCPP 1.6J, IP55, IK08, CE and 2-year warranty. Confirm model selection.

Send email to us Download as PDF

Product Detail

FAQ

Product Tags

7-22kW Residential AC Wallbox EV Charger for New Builds product view 1

Confirmed power options

For new build residential charging, the MIDA AC wallbox family is documented with model MIDA007Y1-A1 at 7kW and model MIDA022Y1-A1 at 22kW. The 7kW version is 1P+N+PE, 230V AC, 32A, 50/60Hz, with 230V AC output and maximum 32A. The 22kW version is 3P+N+PE, 400VAC plus or minus 20 percent, 50/60Hz, 32A per phase, with 380V AC output and maximum 32A. These electrical values are taken from the stated manual and tabular specification. The page presents application context only and does not promise charging time, vehicle coverage, or site performance. This wording is limited to confirmed source data and leaves installation design, current allocation, cable routing, and vehicle compatibility for project-specific engineering confirmation before any commercial commitment is made.

User interface and charge modes

The documented user interface for new build residential charging includes green, yellow, and red LED status indicators, RFID using Mifare ISO/IEC 14443 A, and Plug&Charge, RFID, or App charge modes. Emergency stop is listed as Yes. The tabular datasheet specifies a 4.3-inch LCD; a manual page refers to a 5-inch touchscreen, so the display size is treated as a documented source conflict and the table follows the tabular value. These features describe the listed configuration only. They do not establish payment, roaming, software functions, or a particular vehicle brand. Final integration should follow approved product documentation. Buyers should verify regional electrical requirements, access policy, and backend needs before ordering.

7-22kW Residential AC Wallbox EV Charger for New Builds product view 2

7-22kW Residential AC Wallbox EV Charger for New Builds product view 3

Connectivity and protection

For new build residential charging, communications are documented as WiFi and Ethernet, with 4G optional and OCPP 1.6J listed. A mid meter is optional. Electrical protection includes 30mA Type A plus 6mA DC residual-current protection, with overcurrent, residual-current, short-circuit, ground, lightning, over-and-under-voltage, over-and-under-frequency, and overtemperature protection. The enclosure is listed as IP55 and IK08. These statements are source-based specification fields, not image-derived assumptions. They should not be extended into claims about a backend, billing service, remote monitoring, or local regulatory approval beyond the stated CE and standards references. Project teams should confirm commissioning, utility requirements, protective coordination, and software integration separately because these implementation details remain subject to the final order.

Installation and source review

The documented installation and environment information for new build residential charging specifies wall hanging, a working temperature of -30C to +50C, humidity of 5%-95%, and altitude below 2000m. Supply cable sizes are 3*6mm2 for 7kW and 5*6mm2 for 22kW. CE is listed, together with EN/IEC 61851-1:2017 and EN/IEC 61851-21-2:2018. Warranty is 2 years. Manual dimensions and weights conflict with the image specification sheet, so they are shown only in an explicit confirmation row, not as hard parameters. The listing remains a draft and requires final source review. Confirm the drawing, package plan, wall substrate, service clearance, and installation accessories before release during technical review carefully.

7-22kW Residential AC Wallbox EV Charger for New Builds product view 4

Specification	Value
Models	MIDA007Y1-A1 (7kW); MIDA022Y1-A1 (22kW)
7kW electrical input	1P+N+PE; 230V AC; 32A; 50/60Hz
7kW electrical output	230V AC; maximum 32A; 7kW
22kW electrical input	3P+N+PE; 400VAC +/-20%; 50/60Hz; 32A per phase
22kW electrical output	380V AC; maximum 32A; 22kW
Status indicators	Green / yellow / red LED
Display	4.3-inch LCD per tabular datasheet; manual page says 5-inch touchscreen
RFID	Mifare ISO/IEC 14443 A
Charge modes	Plug&Charge / RFID / App
Emergency stop	Yes
Connectivity	WiFi; Ethernet; 4G optional
Protocol	OCPP 1.6J
Meter	Mid meter optional
Residual-current protection	30mA Type A + 6mA DC
Protection functions	Overcurrent; residual current; short circuit; ground; lightning; over/under voltage; over/under frequency; overtemperature
Ingress / impact	IP55; IK08
Compliance	CE; EN/IEC 61851-1:2017; EN/IEC 61851-21-2:2018
Warranty	2 years
Installation	Wall hanging; column installation shown in image specification
Working environment	-30C to +50C; humidity 5%-95%; altitude below 2000m
Supply cable	7kW: 36mm2; 22kW: 56mm2