7kW 11kW 22kW AC Wallbox EV Charger for Solar Home Charging Projects

Short Description:

Review a 7kW AC wallbox EV charger for solar home charging projects, based on MIDA 7kW and 22kW models with documented protection, RFID, App, WiFi, Ethernet, optional 4G, OCPP 1.6J, CE, IP55 and IK08. Confirm final configuration before release.

Send email to us Download as PDF

Product Detail

FAQ

Product Tags

7kW AC Wallbox EV Charger for Solar Home Charging Projects product view 1

Confirmed power options

For solar home charging projects, the MIDA AC wallbox family is documented with model MIDA007Y1-A1 at 7kW and model MIDA022Y1-A1 at 22kW. The 7kW version is 1P+N+PE, 230V AC, 32A, 50/60Hz, with 230V AC output and maximum 32A. The 22kW version is 3P+N+PE, 400VAC plus or minus 20 percent, 50/60Hz, 32A per phase, with 380V AC output and maximum 32A. These electrical values are taken from the stated manual and tabular specification. Confirm installation design, current allocation, cable routing, and vehicle compatibility before any commercial commitment is made.

User interface and charge modes

The documented user interface for solar home charging projects includes green, yellow, and red LED status indicators, RFID using Mifare ISO/IEC 14443 A, and Plug&Charge, RFID, or App charge modes. Emergency stop is listed as Yes. The tabular datasheet specifies a 4.3-inch LCD; a manual page refers to a 5-inch touchscreen, so the display size is treated as a documented source conflict and the table follows the tabular value. Verify regional electrical requirements, access policy, and backend needs before ordering.

7kW AC Wallbox EV Charger for Solar Home Charging Projects product view 2

7kW AC Wallbox EV Charger for Solar Home Charging Projects product view 3

Connectivity and protection

For solar home charging projects, communications are documented as WiFi and Ethernet, with 4G optional and OCPP 1.6J listed. A mid meter is optional. Electrical protection includes 30mA Type A plus 6mA DC residual-current protection, with overcurrent, residual-current, short-circuit, ground, lightning, over-and-under-voltage, over-and-under-frequency, and overtemperature protection. The enclosure is listed as IP55 and IK08. Confirm commissioning, utility requirements, protective coordination, and software integration separately because implementation details remain subject to the final order.

Installation and source review

The documented installation and environment information for solar home charging projects specifies wall hanging, a working temperature of -30C to +50C, humidity of 5%-95%, and altitude below 2000m. Supply cable sizes are 3*6mm2 for 7kW and 5*6mm2 for 22kW. CE is listed, together with EN/IEC 61851-1:2017 and EN/IEC 61851-21-2:2018. Warranty is 2 years. Confirm the drawing, package plan, wall substrate, service clearance, and installation accessories before release during technical review carefully.

7kW AC Wallbox EV Charger for Solar Home Charging Projects product view 4

Specification	Value
Models	MIDA007Y1-A1 (7kW); MIDA022Y1-A1 (22kW)
7kW electrical input	1P+N+PE; 230V AC; 32A; 50/60Hz
22kW electrical input	3P+N+PE; 400VAC +/-20%; 50/60Hz; 32A per phase
Connectivity	WiFi; Ethernet; 4G optional
Protocol	OCPP 1.6J
Ingress / impact	IP55; IK08
Compliance	CE; EN/IEC 61851-1:2017; EN/IEC 61851-21-2:2018
Warranty	2 years