English

22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail

22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail Featured Image
  • 22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail
  • 22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail
  • 22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail
  • 22kw 44kW Dual Gun Wallbox with OTA and Remote Control Detail

Short Description:

14-42kW dual-gun Type 2 commercial wallbox with 5m gun cables, APP, RFID, Plug&Charge, MID metering, OCPP, load balancing, IP54, and wall or column mounting for fleet parking. Confirm installation, network service, and regional protection requirements with.


Download as PDF

Product Detail

FAQ

Product Tags

14kW 22kW 44kW Dual Gun Wallbox with OTA and Remote Control Detail Type 2 socket product

Installation and application

The 14kW 22kW 44kW commercial platform shown in Type 2 socket product is positioned for community parking. This line uses dual Type 2 sockets with standard 5m gun cables, giving operators a defined interface for routine vehicle access. Its documented electrical basis is AC220V ±10% or AC400V ±10%; 32A single or 3-phase. The enclosure and mounting arrangement should be coordinated with feeder routing, protective devices, clearance, and inspection requirements. Qualified installers can confirm conductor sizing, earthing, ventilation, and vehicle compatibility before commissioning. This draft does not promise charging time, vehicle coverage, or utility approval. It presents source-confirmed positioning for commercial review while leaving final engineering, civil works, and procedures to the responsible

Protection and commissioning

The protection story is illustrated by B2 parking pillar. The source notes 5-inch versus 7-inch image conflict; screen size omitted The charger is documented with safeguards for abnormal current, voltage, temperature, or leakage where stated. Operators should still provide upstream isolation, correctly rated breakers, suitable earthing, and an emergency response process. Environmental limits must be respected during installation and service. A commissioning checklist should test protective functions, connector or socket condition, communication status, and fault recovery. These measures support responsible operation, but they do not replace regional code review, site risk assessment, or instructions from the final installation authority.

14kW 22kW 44kW Dual Gun Wallbox with OTA and Remote Control Detail B2 parking pillar
14kW 22kW 44kW Dual Gun Wallbox with OTA and Remote Control Detail repeat rain scene

Connected operation

The repeat rain scene supports a connected-service narrative for community parking. The selected line records 4G; WiFi; Ethernet; Bluetooth, with APP; RFID; Plug&Charge; platform functions are documented around OCPP management where applicable. Teams can use remote status, scheduled charging, diagnostics, and upgrades only after backend profiles, credentials, network coverage, and permissions are configured. Load balancing, solar integration, Modbus, EMS, QR booking, encrypted communications, and development-stage vehicle functions remain subject to implementation checks. Final software behavior depends on approved firmware and platform integration. Site teams should document user roles, data access, maintenance ownership, and fallback procedures before activation. Optional features require order confirmation.

Compliance and procurement

For procurement review, Smart LCD, emergency stop, RFID callout frames the unit as a practical option for community parking. The relevant line provides a documented standards position, enclosure rating, operating range, and installation format in the technical table. Verify the regional plug, socket, cable, payment, and network configuration before publishing a purchase offer. C-line promotional material may show Nayax or Pax POS, OTA, and remote-control concepts; these are detail selling points only, not technical table claims. Certification statements remain limited to supplied standards. Packaging, delivery, maintenance access, and warranty handling should be confirmed in the quotation before release to a customer.

14kW 22kW 44kW Dual Gun Wallbox with OTA and Remote Control Detail Smart LCD, emergency stop, RFID callout
power 14kW/42kW
gun configuration Dual gun; Type 2 sockets
gun cable Standard 5m gun cable
startup APP; RFID card; Plug&Charge
networking 4G; WiFi; Ethernet; Bluetooth
platform WS/WSS OCPP1.6J; OCPP2.0 optional
input AC220V ±10%; AC400V ±10%
output current 32A single-phase; 32A three-phase
frequency 48-65Hz
meter MID certified meter
protections Short circuit; overload; over temperature; leakage; overvoltage and other protections
expansion DLB; PEN; ISO15118-2/-20 in development; PnC/V2G/V2H in development
dimensions 460 × 180 × 310mm (W × H × D)
package dimensions 625 × 484 × 380mm
weight Net ≤13kg; gross ≤15kg
ingress impact IP54
operating environment -20°C to +50°C
storage environment -40°C to +70°C
humidity 5-95%
altitude ≤2000m
mounting Wall-mounted or column-mounted
standards EN/IEC 61851-1:2017; EN/IEC 61851-21-2:2018
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories