English

43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking

43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking Featured Image
  • 43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking
  • 43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking
  • 43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking
  • 43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking

Short Description:

43kW commercial tethered Type 2 wallbox for pole-mount and workplace parking, with 400VAC three-phase input, RFID, QR-code booking, OCPP 1.6J, optional 4G, onboard metering, IP54, IK08, CE, and two-year warranty. Confirm installation, network service, and.


Download as PDF

Product Detail

FAQ

Product Tags

43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking B2 parking pillar

Installation and application

The 43kW commercial platform shown in B2 parking pillar is positioned for public parking. This line uses tethered Type 2 cable, giving operators a defined interface for routine vehicle access. Its documented electrical basis is 400VAC ±20%; 50/60Hz; 63A 3-phase. The enclosure and mounting arrangement should be coordinated with feeder routing, protective devices, clearance, and inspection requirements. Qualified installers can confirm conductor sizing, earthing, ventilation, and vehicle compatibility before commissioning. This draft does not promise charging time, vehicle coverage, or utility approval. It presents source-confirmed positioning for commercial review while leaving final engineering, civil works, and procedures to the responsible project team.

Protection and commissioning

The protection story is illustrated by gloved plug insertion. The source notes 5-inch versus 4.3-inch LCD conflict; screen size omitted The charger is documented with safeguards for abnormal current, voltage, temperature, or leakage where stated. Operators should still provide upstream isolation, correctly rated breakers, suitable earthing, and an emergency response process. Environmental limits must be respected during installation and service. A commissioning checklist should test protective functions, connector or socket condition, communication status, and fault recovery. These measures support responsible operation, but they do not replace regional code review, site risk assessment, or instructions from the final installation authority.

43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking gloved plug insertion
43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking dusk charging

Connected operation

The dusk charging supports a connected-service narrative for public parking. The selected line records WiFi; Ethernet; 4G optional, with plug-and-charge or M1 card; platform functions are documented around OCPP management where applicable. Teams can use remote status, scheduled charging, diagnostics, and upgrades only after backend profiles, credentials, network coverage, and permissions are configured. Load balancing, solar integration, Modbus, EMS, QR booking, encrypted communications, and development-stage vehicle functions remain subject to implementation checks. Final software behavior depends on approved firmware and platform integration. Site teams should document user roles, data access, maintenance ownership, and fallback procedures before activation. Optional features require order confirmation.

Compliance and procurement

For procurement review, eight-layer protection infographic frames the unit as a practical option for public parking. The relevant line provides a documented standards position, enclosure rating, operating range, and installation format in the technical table. Verify the regional plug, socket, cable, payment, and network configuration before publishing a purchase offer. C-line promotional material may show Nayax or Pax POS, OTA, and remote-control concepts; these are detail selling points only, not technical table claims. Certification statements remain limited to supplied standards. Packaging, delivery, maintenance access, and warranty handling should be confirmed in the quotation before release to a customer.

43kW Commercial Tethered Type 2 Wallbox for Pole Mount Parking eight-layer protection infographic
charging capacity Up to 43kW
input/output 400VAC ±20%; 50/60Hz; 63A; 3-phase
residual current 30mA Type A + DC 6mA; Type B optional
standby <3W
measuring accuracy 1%
metering On-board electric meter chip metering
protocol OCPP 1.6J; OCPP 2.0 optional
connectivity WiFi; Ethernet; 4G optional
user interface LED; LCD; RFID Mifare ISO/IEC 14443A
charging interface Type 2; 5m cable
protections Over current; residual current; ground; surge; over/under voltage; over/under frequency; over/under temperature
warranty 2 years
ingress impact IP54; IK08
enclosure Plastic PC with tempered glass front
mounting Wall-mount or pole-mount
cooling Natural cooling
operating environment -30°C to +55°C; humidity max 95% non-condensing
dimensions 460 × 310 × 180mm
package dimensions 630 × 490 × 380mm
weight Net 17kg; gross 18.5kg
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories