English

7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites

7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites Featured Image
  • 7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites
  • 7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites
  • 7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites
  • 7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites

Short Description:

7-22kW Type 2 socket EV charger for commercial sites, with single-gun access, APP or RFID startup, DLB, solar PV expansion, OCPP, Modbus monitoring, IP54, IK08, and floor-standing installation. Confirm installation, network service, and regional protection.


Download as PDF

Product Detail

FAQ

Product Tags

7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites floor-stand Type 2 socket

Installation and application

The 7-22kW commercial platform shown in floor-stand Type 2 socket is positioned for community parking. This line uses single Type 2 socket, giving operators a defined interface for routine vehicle access. Its documented electrical basis is AC220V ±10% 1-phase or AC380V ±10% 3-phase. The enclosure and mounting arrangement should be coordinated with feeder routing, protective devices, clearance, and inspection requirements. Qualified installers can confirm conductor sizing, earthing, ventilation, and vehicle compatibility before commissioning. This draft does not promise charging time, vehicle coverage, or utility approval. It presents source-confirmed positioning for commercial review while leaving final engineering, civil works, and procedures to the responsible project team.

Protection and commissioning

The protection story is illustrated by Type 2 socket product. The source notes IP54 datasheet versus IP55 image conflict; IP55 omitted The charger is documented with safeguards for abnormal current, voltage, temperature, or leakage where stated. Operators should still provide upstream isolation, correctly rated breakers, suitable earthing, and an emergency response process. Environmental limits must be respected during installation and service. A commissioning checklist should test protective functions, connector or socket condition, communication status, and fault recovery. These measures support responsible operation, but they do not replace regional code review, site risk assessment, or instructions from the final installation authority.

7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites Type 2 socket product
7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites gloved plug insertion

Connected operation

The gloved plug insertion supports a connected-service narrative for community parking. The selected line records 4G; WiFi; Ethernet; Bluetooth, with APP or RFID; platform functions are documented around OCPP management where applicable. Teams can use remote status, scheduled charging, diagnostics, and upgrades only after backend profiles, credentials, network coverage, and permissions are configured. Load balancing, solar integration, Modbus, EMS, QR booking, encrypted communications, and development-stage vehicle functions remain subject to implementation checks. Final software behavior depends on approved firmware and platform integration. Site teams should document user roles, data access, maintenance ownership, and fallback procedures before activation. Optional features require order confirmation.

Compliance and procurement

For procurement review, certification wall frames the unit as a practical option for community parking. The relevant line provides a documented standards position, enclosure rating, operating range, and installation format in the technical table. Verify the regional plug, socket, cable, payment, and network configuration before publishing a purchase offer. C-line promotional material may show Nayax or Pax POS, OTA, and remote-control concepts; these are detail selling points only, not technical table claims. Certification statements remain limited to supplied standards. Packaging, delivery, maintenance access, and warranty handling should be confirmed in the quotation before release to a customer.

7-22kW Type 2 Socket Wallbox for Retail and Workplace Sites certification wall
power 7/11/22kW
charging interface Type 2 socket; single gun socket version
input AC220V ±10% (1-phase); AC380V ±10% (3-phase)
output current 0-32A (1-phase); 0-63A (3-phase)
frequency 48-65Hz
startup APP or RFID
networking 4G; WiFi; Ethernet; Bluetooth
platform WS/WSS OCPP1.6J; OCPP2.0 optional
protections Short circuit; overload; over temperature; leakage; overvoltage and other protections
expansion PEN optional; DLB; solar PV; PLC ISO15118-2/-20 in development; PnC/V2G/V2H in development; RS485 Modbus; EMS docking
ingress impact IP54; IK08
operating environment -30°C to +50°C
storage environment -40°C to +70°C
humidity 5-95%
altitude ≤2000m
dimensions 500 × 350 × 250mm
package dimensions 570 × 406 × 266mm
installation Floor-standing
standards EN/IEC 61851-1:2017; EN/IEC 61851-21-2:2018
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories